LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 971 (Transfer Case - NVG 246-NP8) >> Repair Instructions >> Transfer Case Input Shaft Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transfer case. Refer to Transfer Case Assembly Replacement .
  2. Using a flat-tipped screwdriver, remove the input shaft seal.
    3. Fig 1: Removing Input Shaft Seal
    GM678215Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals