LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 968 (HVAC Systems - Manual) >> Repair Instructions >> Air Temperature Actuator Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the air temperature actuator.
    Fig 1: Air Temperature Actuator
    GM363780Courtesy of GENERAL MOTORS CORP.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 2: Air Temperature Actuator Retaining Screws
    GM363779Courtesy of GENERAL MOTORS CORP.
  2. Install the air temperature actuator retaining screws.

    Tighten:  Tighten the screws to 1.6 N.m (14 lb in).

  3. Connect the electrical connector (8) to the air temperature actuator (9).
    Fig 3: Identifying Electrical Connectors
    GM372310Courtesy of GENERAL MOTORS CORP.
  4. Install the IP insulator. Refer to Insulator Replacement - Instrument Panel (I/P) in Instrument Panel, Gages, and Console.
scientia non olet · About LEMON Manuals