Circuit Description
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The driver seat module (DSM) monitors the positions of most of the seat adjuster motors using hall effect type position sensors. The hall effect position sensors are supplied with battery positive reference and ground circuits from the DSM. The position sensor signal circuits are supplied battery positive voltage through a resistor then monitored within the DSM. During adjuster motor operation the hall effect position sensor provides a single pulse for every adjuster motor shaft rotation. The DSM counts the pulses from the position sensor signal circuits to determine the adjuster motor positions when storing or recalling memory seat position settings.