LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Battery, Charging System & Starting System) >> Repair Instructions >> Starter/Generator Stator Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission. Refer to Transmission Replacement (4.8L, 5.3L, and 6.0L Engines) or Transmission Replacement (5.3L Engine w/RPO HP2) in Automatic Transmission - 4L60-E/4L65-E.
  2. Remove the starter/generator stator stud.
  3. Remove the starter/generator stator.

    Rotate the stator until the 3-phase cable junction block is near the bottom.

  4. Fig 1: View Of Starter.Generator Stator & Studs (5.3L Engine w/RPO HP2)
    GM1195710Courtesy of GENERAL MOTORS CORP.