LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 955 (Battery, Charging System & Starting System) >> Repair Instructions >> Energy Storage Box (ESB) High Current Sensor Replacement (5.3L Engine w/RPO HP2) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the battery cut-off switch. Refer to Energy Storage Box (ESB) Cut Off Switch Replacement (5.3L Engine w/RPO HP2) .
  2. Disconnect the high current sensor electrical connector.
  3. Remove the fuse power cable to high current sensor nut.
  4. Remove the fuse power cable from the terminal.
  5. Remove the high current sensor (2).
    6. Fig 1: View Of High Current Sensor & Battery Cut-Off Switch (5.3L Engine w/RPO HP2)
    GM1456043Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals