Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Connect the receptacle electrical connections.
Install the receptacle outlet (3) to the receptacle box (1).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the receptacle outlet screws (2).
Tighten: Tighten the screws to 2 N.m (18 lb in).

Fig 1: View Of Receptacle Box, Outlet & Screws (5.3L Engine w/RPO HP2)

Courtesy of GENERAL MOTORS CORP.

Install the receptacle face plate. Refer to Energy Storage Box (ESB) 120V Receptacle Face Plate Replacement (5.3L Engine w/RPO HP2) .