LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 953 (Manual Transmission Clutch System) >> Repair Instructions >> Clutch Actuator Cylinder Replacement (NV3500/NV4500 Transmissions) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the clutch actuator cylinder.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: Clutch Actuator Cylinder (NV3500/NV4500 Transmissions)
    GM772346Courtesy of GENERAL MOTORS CORP.
  2. Install the clutch actuator cylinder bolts.

    Tighten:  Tighten the bolts to 8 N.m (71 lb in).

  3. Install the manual transmission. Refer to Transmission Replacement in Manual Transmission - NV 3500, or Transmission Replacement in Manual Transmission - NV 4500.