LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 951 (Engine Controls - 6.6L (LLY) (Introduction)) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the exhaust gas recirculation (EGR) cooler tube. Refer to Exhaust Gas Recirculation (EGR) Valve Cooler Tube Replacement .
  2. Remove the EGR valve bolts (3).
  3. Remove the EGR valve/solenoid assembly (1).
    Fig 1: View Of EGR Valve Assembly
    GM1401821Courtesy of GENERAL MOTORS CORP.
  4. Remove and discard the EGR valve/solenoid assembly gasket (2).
scientia non olet · About LEMON Manuals