LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 951 (Engine Controls - 6.6L (LLY) (Introduction)) >> Repair Instructions >> Barometric Pressure (BARO) Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Barometric Pressure Sensor
    GM1409330Courtesy of GENERAL MOTORS CORP.
  1. Push the BARO sensor (1) upward in order to remove it from the bracket.
    2. Fig 2: View Of Barometric Pressure Sensor Electrical Connector
    GM1334921Courtesy of GENERAL MOTORS CORP.
  2. Connect the BARO sensor electrical connector.
scientia non olet · About LEMON Manuals