LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 949 (Steering Wheel And Steering Column) >> Repair Instructions >> Steering Column Seal Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the front wheels in the straight-ahead position.
  2. Set the steering wheel in the LOCK position.
  3. Remove the intermediate shaft. Refer to Intermediate Steering Shaft Replacement - Lower .
  4. Remove the nuts from the studs.
  5. Remove the seal from the vehicle.
    Fig 1: Steering Column Seal
    GM362507Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals