LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 949 (Steering Wheel And Steering Column) >> Repair Instructions >> Shift Lever Replacement (Without Tow/Haul Switch) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift lever (1).
    Fig 1: Installing The Shift Lever (Without Tow/Haul Switch)
    GM362445Courtesy of GENERAL MOTORS CORP.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the TORX® head shift lever screw (2).

    Tighten:  Tighten the screw to 20 N.m.

  3. Roll the seal over the TORX® head shift lever screw (2).
scientia non olet · About LEMON Manuals