LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 947 (Engine Controls - 4.8L, 5.3L, & 6.0L (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement (Pickup - 5.3L (L59) Engine) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: Clean the fuel feed/return pipes connections and surrounding areas prior to disconnecting the fittings in order to avoid possible fuel system contamination.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Pickup)  or Fuel Tank Replacement (Pickup - 5.3L (L59) Engine)  or Fuel Tank Replacement (1500 Crew Cab)  or Fuel Tank Replacement (Cab/Chassis - Front)  or Fuel Tank Replacement (Cab/Chassis - Rear) .
  2. Disconnect and remove the fuel feed (3) and/or fuel return (2) line from the sending unit and retaining clips.
    3. Fig 1: EVAP Pipe, Fuel Feed And Return Pipes
    GM815641Courtesy of GENERAL MOTORS CORP.
  3. Cap the fuel feed/return, and evaporative emission (EVAP) lines in order to prevent possible fuel/EVAP system contamination.
scientia non olet · About LEMON Manuals