LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 947 (Engine Controls - 4.8L, 5.3L, & 6.0L (Introduction)) >> Repair Instructions >> Fuel Hose/Pipes Assembly Replacement (Pickup - 5.3L (L59) Engine) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the caps from the fuel feed/return, and EVAP lines.
  2. Install and connect the fuel feed (3) and/or fuel return (2) line to the sending unit and retaining clips.
  3. Fig 1: EVAP Pipe, Fuel Feed And Return Pipes
    GM815641Courtesy of GENERAL MOTORS CORP.
  4. Install the fuel tank. Refer to Fuel Tank Replacement (Pickup)  or Fuel Tank Replacement (Pickup - 5.3L (L59) Engine)  or Fuel Tank Replacement (1500 Crew Cab)  or Fuel Tank Replacement (Cab/Chassis - Front)  or Fuel Tank Replacement (Cab/Chassis - Rear) .