LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Automatic Transmission - Servicing - Except ALLISON) >> Removal & Installation >> Filler Tube (4L80-E) >> Removal

Filler Tube (4L80-E): Removal

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission fluid level indicator from the transmission fluid level indicator tube. If equipped with gasoline engine, remove the stud securing the transmission fluid fill tube bracket to the transmission. If equipped with diesel engine, remove the transmission fluid fill tube bracket and ground wire to the transmission.
  2. On all models, raise and support the vehicle. Remove any dirt from the transmission where the fluid fill tube enters the transmission case. Place a drain pan under the transmission.
  3. Remove the transmission fluid fill tube from the transmission. See Figure. Pull the tube upward from the transmission. Remove the transmission fill tube seal. See Figure.
scientia non olet · About LEMON Manuals