Extension Housing Assembly (4L80-E): Removal
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and suitably support the vehicle. Support the transmission with a transmission jack. Place a drain pan under the vehicle.
- Remove the propeller shaft. See REMOVAL & INSTALLATION in appropriate DRIVE SHAFTS & UNIVERSAL JOINTS article in DRIVE AXLES. Remove the transmission support and the transmission mount.
- Remove the case extension bolts. Remove the case extension. See Figure. Remove and discard the case extension O-ring seal.