LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Automatic Transmission - Servicing - Except ALLISON) >> Removal & Installation >> Extension Housing Assembly (4L60-E) >> Installation

Extension Housing Assembly (4L60-E): Installation

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2002 GMC Yukon XL, 2002 GMC Yukon, 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, and 2002 GMC C3500 HD. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new case extension O- ring seal. Install the case extension.
  2. Install the case extension bolts. See Fig 1. Tighten the case extension bolts to specification. See TORQUE SPECIFICATIONS . Install the transmission mount.
  3. Install the propeller shaft. See REMOVAL & INSTALLATION in appropriate DRIVE SHAFTS & UNIVERSAL JOINTS article in DRIVE AXLES. Remove the drain pan and the transmission jack. Lower the vehicle. Fill transmission with appropriate fluid to proper level. See LUBRICATION .
Fig 1: Removing & Installing Extension Housing
G00087663Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals