LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 937 (Manual Transmission -- NV 3500) >> Repair Instructions >> Shift Lever Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra and 2004 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a NEW shift lever insulator.
    Fig 1: Installing A New Shift Lever Insulator
    GM772342Courtesy of GENERAL MOTORS CORP.
  2. Install the shift lever seal and lever.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the shift lever bolts.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

  4. Install the boot.
  5. Install the control lever and boot. Refer to Control Lever and/or Boot Replacement .