LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 933 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter (Regular Cab) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the quarter panel.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the quarter panel trim screws.

    Tighten:  Tighten the quarter panel trim screws to 2 N.m (18 lb in).

  4. Fig 1: Installing Rear Quarter Trim Panel (Regular Cab)
    GM348549Courtesy of GENERAL MOTORS CORP.
  5. Install the rear screw into the sill trim plate.
  6. Install the rear window lower molding. Refer to Molding Replacement - Rear Window Lower  .
  7. Install the jack and tool stowage.
  8. Install the coat hook. Refer to Coat Hook Replacement  .