LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Switch Replacement - Hot and Cold Cupholder >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the new switch until the tabs (1) clicks in place.
    Fig 1: Hot & Cold Cupholder Switch Retaining Tabs
    GM824839Courtesy of GENERAL MOTORS CORP.

    Ensure the red light is pointing rearward of the vehicle.

  2. Connect the electrical connectors.
  3. Fig 2: Hot & Cold Cupholder Switches
    GM824844Courtesy of GENERAL MOTORS CORP.
  4. Install the cupholder assembly to the console. Refer to Cupholder Replacement (Luxury) , Cupholder Replacement (Non-Luxury) , Cupholder Replacement (Rear)  or Cupholder Replacement (Pro) .