LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel Cluster (IPC) Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel cluster (IPC) trim plate bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
  2. Remove the screws that retain the IPC to the instrument panel (I/P) assembly.
    3. Fig 1: Removing IPC Assembly
    GM348794Courtesy of GENERAL MOTORS CORP.
  3. Remove the IPC (2) from the vehicle by tilting the bottom of the cluster outward.
  4. Disconnect the IPC harness (1) from the IPC.
    Fig 2: Disconnecting IPC Harness
    GM854865Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals