LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Instrument Panel (I/P) Trim Panel Replacement - Lower >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) cluster trim bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
  2. Remove the center console, if equipped. Refer to Console Replacement (w/Console Mounting Bracket)  or Console Replacement (w/o Console Mounting Bracket) .
  3. Open the I/P compartment door.
  4. Remove the bolts retaining the lower trim panel to the I/P assembly.
    5. Fig 1: Removing Lower I/P Trim Panel
    GM348701Courtesy of GENERAL MOTORS CORP.
  5. Disconnect all of the electrical connectors (1, 2, 3).
    6. Fig 2: Disconnecting Lower I/P Trim Panel Electrical Connectors
    GM375028Courtesy of GENERAL MOTORS CORP.
  6. Remove the lower trim panel from the I/P assembly.
scientia non olet · About LEMON Manuals