Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the console door to the console.
- Install the four retaining screws.
Tighten: Tighten the four retaining screws to 1.6 N.m (14 lb in).
- Close the lid and ensure the lid is properly aligned.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.