LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Instrument Panel System Displays, Gauges And Console) >> Repair Instructions >> Accessory Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the IP trim bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster .
  2. Grasp the accessory switch assembly and pull outwards to remove the button assembly.
    3. Fig 1: Removing Button Assembly
    GM658559Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connectors for the switches in the assembly.
  4. Remove the switches and the button assembly.
scientia non olet · About LEMON Manuals