Change Engine Oil Indicator Always On
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
Change Engine Oil Indicator Always On
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics | |||
| 1 | Did you perform the Instrument Cluster Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Instrument Cluster |
| 2 | Start the engine. Does the CHANGE ENGINE OIL indicator illuminate in the Driver Information Center? |
Go to Step 3 | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems |
| 3 |
|
Go to Step 4 | Go to Step 5 |
| 4 | Reset the engine oil life. Refer to GM Oil Life System - Resetting
in Maintenance and Lubrication. Does the CHANGE ENGINE OIL indicator turn off? |
Go to Step 6 | Go to Step 5 |
| 5 |
IMPORTANT:
Program the replacement IPC. Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement .Did you complete the replacement? |
Go to Step 6 | - |
| 6 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |