LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 932 (Instrument Panel System Displays, Gauges And Console) >> Description and Operation >> Driver Information Center (DIC) Description and Operation >> DIC Displays >> Vehicle Information >> Trip Reset Stem

Trip Reset Stem

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The trip reset stem on the IPC operates in the following manner with the ignition switch in the RUN position:

  1. Each time the trip reset stem is pushed the display will cycle to the next trip parameter. The trip parameters are as follows:
    • Odometer
    • Personal Trip odometer
    • Business Trip odometer
    • Timer
    • Hourmeter
  2. Holding the trip reset stem for greater than 1 second or depressing the SWC Select button while either Personal Trip or Business Trip odometer is displayed will reset the displayed trip odometer and all other corresponding trip parameters to 0.0 upon release of the stem. The trip odometer will remain displayed after being reset.
  3. If a trip information parameter is being displayed, pressing the DIC Trip Information button will display the next trip information parameter.
  4. If the next Trip Information parameter to be displayed is Timer, Hourmeter, or blank, pressing the reset stem will return the display to the Odometer.
scientia non olet · About LEMON Manuals