LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 93 (Automatic Transmission Servicing) >> Removal & Installation >> Oil Cooler Hose/Pipes (4T65-E) >> Removal

Oil Cooler Hose/Pipes (4T65-E): Removal

WARNING: This page is about a different car, the 2002 Oldsmobile Aurora. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Position a drain pan under the vehicle. Remove the transaxle oil cooler hose retainer at the transaxle. See Fig 1 .
  2. Slide the white plastic covers away from the transaxle oil cooler hose quick connections. Disconnect the transaxle oil cooler hoses from the transaxle using the Cooler Quick Connect Tool (J-41623-B). See Fig 2 .
  3. Slide the white plastic covers away from the transaxle oil cooler hose quick connections. Disconnect the transaxle oil cooler hoses from the radiator using the cooler quick connect tool. Remove the transaxle oil cooler hoses (1, 2) from the vehicle. See Fig 3 .
Fig 1: Removing & Installing Oil Cooler Hose Retainer At Transaxle
G00087781Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing & Installing Oil Cooler Lines From Transaxle
G00087782Courtesy of GENERAL MOTORS CORP.
Fig 3: Removing & Installing Oil Cooler Pipes At Radiator
G00087783Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals