Removal Procedure
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the driver-side seat belt buckle electrical connector.
- Remove the bolt that retains the driver-side seat belt buckle or buckles to the seat.
- Remove the driver-side seat belt buckle or buckles from the seat.
- Remove the bolt that retains the passenger-side seat belt buckle or buckle and belt assembly to the seat.
- Remove the passenger-side seat belt buckle or buckle and belt assembly from the seat.