Test Description
WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
The numbers below refer to the step numbers in the diagnostic procedures.
- 3
With the ignition ON and the engine OFF, the BARO sensor and the boost sensor should indicate the current barometric pressure. A significant difference between the readings indicates an electrical fault. - 5
This step tests the wastegate actuator diaphragm for a leak. - 6
This step tests the wastegate actuator, the linkage, and the wastegate for proper operation.