LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Engine Controls - Self-Diagnostics - 6.6L Diesel) >> Diagnostic Tests >> DTC P0181: Fuel Rail Temperature Sensor & IAT Sensor Temperature Not Within Specification >> Test Description

Test Description

WARNING: This page is about a different car, the 2002 GMC Sierra, 2002 GMC Cab & Chassis Sierra, 2002 Chevrolet Silverado, and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

The numbers below refer to the step numbers in the diagnostic procedures.

  1. 2

    This step determines if the IAT sensor reading is reading within a normal range. If the reading is outside of the specification, the IAT sensor may have a fault in the sensor or circuit.
  2. 3

    This step determines if the fault is present at the time of diagnosis.
  3. 11

    Reprogram the replacement ECM. See ENGINE CONTROL MODULE  under PROGRAMMING.