LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 919 (Body Rear End) >> Repair Instructions >> Pressure Relief Valve Replacement (Utility) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the body side stationary window (2-Door only). Refer to BODY SIDE STATIONARY WINDOW REPLACEMENT (UTILITY) or BODY SIDE STATIONARY WINDOW REPLACEMENT (PICKUP) in Stationary Windows.
  2. Remove the molding from the quarter panel rear window (4-Door only).
    Fig 1: Quarter Panel Rear Window
    G01478342Courtesy of GENERAL MOTORS CORP.
  3. Remove the pressure relief ventilation valve using a flat-bladed tool in order to release the retainers.
    Fig 2: Pressure Relief Ventilation Valve
    G01478343Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals