LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 919 (Body Rear End) >> Repair Instructions >> Latch Replacement - End Gate Window >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the endgate cover. Refer to END GATE COVER REPLACEMENT .
  2. Mark the location of the endgate window latch in order to ensure proper alignment at installation.
  3. Disconnect the electrical connectors, as needed.
  4. Remove the nuts that retain the endgate window latch to the endgate window latch support.
  5. Remove the endgate window latch from the endgate.
    Fig 1: Removing Endgate Window Latch From Endgate
    G01478268Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals