LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 919 (Body Rear End) >> Repair Instructions >> End Gate Adjustment >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the endgate or the liftgate.
  2. Remove the rubber bumper.
  3. Turn the cargo net button counterclockwise in order to remove the cargo net button.
  4. Rotate the bumper clockwise or counterclockwise in order to adjust the bumper.
  5. Reinstall the bumper before checking the adjustment. The endgate or the liftgate should seal completely with a minimum of closing effort.
  6. Apply a drop of liquid thread adhesive GM P/N 12345382 (Canadian P/N 10953489) or the equivalent to the bumper threads.
    Fig 1: Rubber Bumper
    G01478220Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals