LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 919 (Body Rear End) >> Repair Instructions >> Bed Rail Protector Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install bed rail protector gaskets.
  2. Install bed rail protector.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install bolts and pressure plates.

    Tighten 

    Tighten the bolt to 6.8 N.m (60.2 lb in).

  4. Install the body plugs.
    Fig 1: Bed Rail Protector Gaskets
    G01478311Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals