LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 914 (Bumper System) >> Repair Instructions >> Filler Panel Replacement - Rear Bumper (Utility Vehicles with Liftgate) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the bumper filler panel to the vehicle by pressing the retaining clips onto the vehicle body holes.
  2. Install the license plate lamp harness. Refer to LICENSE LAMP REPLACEMENT (W/ STEP BUMPER) or LICENSE LAMP REPLACEMENT (W/O STEP BUMPER) or LICENSE LAMP REPLACEMENT (FILLER PANEL) in Lighting Systems.
    Fig 1: Installing Bumper Filler Panel To Vehicle
    G01477504Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals