LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 914 (Bumper System) >> Repair Instructions >> Bracket Replacement - Rear Bumper (Pickup) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear bumper impact bar. Refer to IMPACT BAR REPLACEMENT - REAR BUMPER (PICKUP)  or IMPACT BAR REPLACEMENT - REAR BUMPER (UTILITY) .
  2. Remove the bolt securing the rear step brace to the rear bumper bracket, if equipped.
  3. Remove 3 nuts and bolts securing the rear bumper bracket to each frame rail.
  4. Remove the rear bumper bracket from the frame rail.
    Fig 1: Removing Rear Bumper Bracket From Frame Rail
    G01477521Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals