LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 91 (Automatic Transmission - Servicing - ALLISON) >> Removal & Installation >> Filler Tube & Seal (8.1L) >> Removal

Filler Tube & Seal (8.1L): Removal

WARNING: This page is about a different car, the 2002 GMC Sierra and 2002 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. The transmission case has provisions that enable the fill tube to be installed on either the right or left side of the transmission. If servicing the plug and/or seal opposite the fill tube, go to step  4 .
  2. Remove the transmission fluid level indicator. Raise and suitably support the vehicle. Remove the nuts attaching the fill tube to the transmission. See Figure .
  3. Place a drain pan under the transmission to catch any dripping fluid. Loosen the fill tube from the transmission.
  4. Remove the fill tube and seal from the vehicle. Remove the fill tube plug (1). Remove the fill tube plug seal (2). See Figure .
scientia non olet · About LEMON Manuals