LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 907 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Trim Panel Replacement - Knee Bolster >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Set the park brake.
  2. Block the wheels.
  3. Remove the left-side instrument panel sound insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - LEFT .
  4. Remove the lower instrument panel sound insulator. Refer to CLOSEOUT/INSULATOR PANEL REPLACEMENT - INSTRUMENT PANEL (I/P) LOWER .
  5. Release the park brake release cable from the park brake lever. Refer to PARK BRAKE CABLE -- FRONT in Park Brake.
  6. Remove the screw that retains the courtesy lamp to the knee bolster. Refer to COURTESY LAMP REPLACEMENT -- INSTRUMENT PANEL (LOWER) in Lighting Systems.
  7. Remove the screws that retain the knee bolster trim panel to the instrument panel.
  8. Remove the knee bolster trim panel from the vehicle.
    Fig 1: Removing Knee Bolster Trim Panel To Instrument Panel Retaining Screws
    G01476622Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals