LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 907 (Instrument Panel, Gages, And Console) >> Repair Instructions >> Closeout/Insulator Panel Replacement - Right >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the instrument panel sound insulator to the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the screws that retain the instrument panel sound insulator to the following components:
    • The instrument panel
    • The cowl

      Tighten 

      Tighten the screws to 1.9 N.m (17 lb in).

    Fig 1: Installing Instrument Panel Sound Insulator To Vehicle
    G01476617Courtesy of GENERAL MOTORS CORP.