LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 903 (Lighting Systems) >> Repair Instructions >> Hazard and Turn Signal Flasher Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the glove box to expose the glove box retaining tab (1).
  2. Lift the retaining tab and allow the glove box to hang freely.
    Fig 1: Locating Glove Box Retaining Tab
    G01476283Courtesy of GENERAL MOTORS CORP.
  3. Using a suitable flat-bladed tool, release the plastic retainer that retains the hazard/turn signal flasher (1) to the C203 body harness connector (2).
  4. Remove the hazard/ turn signal flasher (1).
    Fig 2: Hazard/Turn Signal Flasher
    G01476284Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals