Circuit Protection - Fuses
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
The fuse is the most common method of an automotive Wiring circuit protection. Whenever there is an excessive amount of current flowing through a circuit or the fusible element will melt and create an open or incomplete circuit. Fuses are an one time protection device and must be replaced each time the circuit is overloaded.
To determine if a fuse is open, remove the for an open (break). If not broken also check for continuity using a DMM or a continuity tester. If the element is open or continuity is suspect, replace the fuse with one of equal current rating.