LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 899 (Manual Transmission - NV 1500) >> Repair Instructions >> Shift Tower Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma and 2003 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the shift housing to the transmission case.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the 4 bolts securing the shift housing to the transmission.

    Tighten 

    Tighten the shift housing bolts to 20 N.m (15 lb ft).

    Fig 1: Installing Shift Housing To Transmission Case
    G01979510Courtesy of GENERAL MOTORS CORP.
  3. Install the screws securing the boot to the panel.

    Tighten 

    Tighten the screws to 2 N.m (18 lb in).

    Fig 2: Installing Screws Securing Boot To Panel
    G01979511Courtesy of GENERAL MOTORS CORP.
  4. Install the shift lever to the Shift tower housing.
  5. Install the console and the 3 console nuts (If equipped).

    Tighten 

    Tighten the nuts to 2 N.m (18 lb in).

    Fig 3: Installing Shift Lever To Shift Tower Housing
    G01979512Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals