LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 884 (Engine Mechanical - 2.2L (LN2)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Pump Drive Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma and 2003 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the intake manifold. Refer to INTAKE MANIFOLD REPLACEMENT  .
  2. Remove the oil pump drive bolt.
  3. Use a lifting and turning motion to remove the oil pump drive.
  4. Inspect the oil pump drive shaft for excessive wear or damage.
    Fig 1: Removing Oil Pump Drive
    G01977012Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals