LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 884 (Engine Mechanical - 2.2L (LN2)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Engine Flywheel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma and 2003 Chevrolet S10 Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the transmission.
  2. Remove the clutch assembly, if equipped. Refer to CLUTCH ASSEMBLY REPLACEMENT in Clutch.
  3. Remove the flywheel bolts.
  4. Remove the flywheel spacer if a flywheel spacer is used.
  5. Remove the flywheel.

    Important:  If the flywheel is cracked or damaged replace the flywheel.

    Fig 1: Removing Flywheel
    G01977052Courtesy of GENERAL MOTORS CORP.
  6. Clean and inspect the flywheel. Refer to ENGINE FLYWHEEL CLEANING AND INSPECTION  .
scientia non olet · About LEMON Manuals