LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 882 (Transfer Case - NVG 236/246-NP8 (Two Speed Automatic)) >> Repair Instructions >> Transfer Case Shift Control Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Important:  When installing the control switch, a snap should be felt or heard when it is properly seated.

  1. Install the electrical connectors in the transfer case control switch.
  2. Install the automatic transfer case switch into the instrument panel.
    Fig 1: Installing Control Switch From Instrument Panel
    G01468442Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals