Tools Required
WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.
- J 8092 Driver Handle
- J 21128 Axle Pinion Oil Seal Installer (8.6 inch Axle)
- J 22813-01 Axle Bearing Remover/Installer (7.6 inch Axle)
- J 23690 Axle Shaft Bearing Installer (8.6 inch Axle)
- J 23689-A Axle Shaft Bearing Remover (1st design 8.6 inch Axle)
- J 23771 Axle Shaft Seal Installer (7.6 inch Axle)
- J 23765 Axle Shaft Bearing Installer (7.6 inch Axle)
- J 2619-01 Slide Hammer
- J 44685 Rear Axle Seal and Bearing Remover (2nd design 8.6 inch Axle)