LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 879 (Front Drive Axle - 4WD) >> Repair Instructions >> Differential Carrier Assembly - Disassemble >> Inspection Procedure

Inspection Procedure

WARNING: This page is about a different car, the 2003 GMC Sonoma, 2003 GMC Jimmy, 2003 Chevrolet S10 Pickup, and 2003 Chevrolet Blazer. However, it is still accessible from the selected car via links, so may be relevant.

Perform the following before disassembling the axle:

  1. Remove the drain plug from the axle.
  2. Drain the axle lubricant.
  3. Inspect the oil and the case for metal chips.
  4. Determine the source of the metal chips, such as a broken gear or bearing cage.
  5. Check the ring gear backlash. Refer to BACKLASH INSPECTION AND ADJUSTMENT  .

This information can be used in order to determine the cause of the axle problem. The information will also help when setting up and preloading the differential case.

Determine the cause of the axle problem before disassembly, if possible.

scientia non olet · About LEMON Manuals