LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 871 (Lighting Systems) >> Repair Instructions >> Daytime Running Lamps (DRL) Ambient Light Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel upper trim pad. Refer to TRIM PAD REPLACEMENT -- INSTRUMENT PANEL (I/P) UPPER (AZTEK) or TRIM PAD REPLACEMENT -- INSTRUMENT PANEL (I/P) UPPER (RENDEZVOUS) .
  2. Remove the daytime running lamp ambient light sensor socket from instrument panel trim pad by twisting 1/4 turn counterclockwise.
    Fig 1: Daytime Running Lamps (DRL) Ambient Light Sensor Removal (1 Of 2)
    G01515432Courtesy of GENERAL MOTORS CORP.
  3. Remove the daytime running lamp ambient light sensor from the daytime running lamp ambient light connector.
    Fig 2: Daytime Running Lamps (DRL) Ambient Light Sensor Removal (2 Of 2)
    G01515433Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals