Installation Procedure
WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
Important: Verify that the release lever is at the top of the adjuster bracket in the full up position.
- Install the shoulder belt guide adjuster bracket to the center pillar.
- Install the bolt to the shoulder belt guide belt adjuster bracket.
Tighten
Tighten the shoulder belt guide adjuster bracket bolts to 42 N.m (31 lb ft).
- Install the center pillar upper trim panel. Refer to TRIM PANEL REPLACEMENT -- UPPER CENTER PILLAR .