LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 868 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Rear (Split Bench) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right and/or left rear split bench seat from the vehicle. Refer to SEAT REPLACEMENT -- REAR 50-50 SPLIT .
  2. Place the rear bench seat with the bottom of the rear bench seat in the upward position.
  3. Remove the rear bench seat trim to access the right and/or left rear seat belt buckle anchor.
  4. Remove the bolt from the right and/or left rear bench seat belt buckle anchor.
    Fig 1: Removing Procedure Of Seat Belt Buckle - Rear Split Bench (1 Of 2)
    G01515034Courtesy of GENERAL MOTORS CORP.
  5. Remove the rear seat belt buckle from the right and/or left rear seat belt anchor pulling the seat belt buckle through the slot in the rear seat cushion.
    Fig 2: Removing Procedure Of Seat Belt Buckle - Rear Split Bench (2 Of 2)
    G01515035Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals