LEMON Manuals: Even more car manuals for everyone
Home >> GMC >> 2003 >> Safari Van Cargo, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 867 (Body Rear End) >> Repair Instructions >> Hinge Replacement - End Gate >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Aztek and 2003 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the liftgate.
  2. Open the endgate.
  3. Disconnect the electrical harness from the endgate.
  4. Remove the bolts from the endgate hinge to endgate.
  5. Remove the endgate, with an assistant.
    Fig 1: Removing Procedure Hinge Replacement - End Gate (1 Of 2)
    G01518435Courtesy of GENERAL MOTORS CORP.
  6. Remove the endgate nuts from the endgate hinge.
  7. Remove the endgate hinge from the rear body panel.
    Fig 2: Removing Procedure Hinge Replacement - End Gate (2 Of 2)
    G01518436Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals